M-DUINO PLC ARDUINO ETHERNET & GPRS 53ARR I/Os ANALOG/DIGITAL/RELAY PLUS
28 Inputs
32 Outputs
Communications
RTC, µSD, Ethernet, USB, Full/Half duplex, RS485, RS232, I2C, Modbus
GPRS/SIM
(SIM Card not included).
DESCRIPTIONS
Inputs (Arduino Mega included)
– 24 Intputs:
(14x) Analog (0-10Vdc, 10bit) / Digital (7-24Vdc) Inputs configurables by software.
(5x) Digital Inputs (7-24Vdc)
(5x) Interrupt Inputs (7-24Vdc). “Can work like Digital Input (24Vdc)”
Outputs (Arduino Mega included)
– 28 Outputs:
(15x) Relay outputs (220Vac – 5A)
(8x) Analog (0-10Vdc, 8bit ) / Digital Outputs (5-24Vdc)
(5x) Digital Outputs (Optoisolated 24Vdc max)
COMMUNICATIONS
- (1x) GPRS/GSM (based on SIM800L)
– (1x) Ethernet port.
– (1x) USB port (type B).
– (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)
– (1x) RS-232 port.
– (1x) HALF/FULL Duplex RS-485 port.
– (1x) SPI external port (Using MOSI, MISO, SS pins of Arduino)
– TCP IP / Modbus TCP. / Modbus RTU
– WebServer capacity (just through Ethernet)
– Industrial Protocols
Other technical specifications
- RTC (Real Time Clock. NOTE: I2C port used. See pinout modification)
- µSD Socket (using SPI port, chip select D53 pin).
- 100x75x115mm
- DIN Rail mounting.
- Max consum.: 1.2A
- Flash Memory: 256kB (8kB for bootloader)
- SRAM: 8kB
- EEPROM: 4kB
- Clock Speed: 16MHz
*For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)