M-DUINO PLC ARDUINO ETHERNET & WiFi & BLUETOOTH LE 58 I/Os ANALOG/DIGITAL PLUS
From 6 to 36 inputs
From 11 to 31 outputs
Communications
RTC, µSD, Ethernet, USB, Full/Half duplex, RS485, RS232, I2C, Modbus
Wi-Fi & Bluetooth LE (ESP32).
DESCRIPTIONS
Inputs (Arduino Mega included)
– 36 Inputs:
(16x) Analog Inputs (0-10Vdc) / Digital Inputs (7-24Vdc) configurable by software.
(20x) Isolated Digital Inputs (7-24Vdc) / (6x) of which can work as interrupt.
Outputs (Arduino Mega included)
– 22 Outputs:
– 22 Outputs:
(22x) Isolated Digital Outputs (5-24Vdc) / (8 of which) PWM configurable by software.
(8 of which) Analog Outputs (0-10Vdc)
COMMUNICATIONS
- (1x) WiFi & Bluetooth LE (based on ESP32)
– (1x) Ethernet port.
– (1x) USB port (type B).
– (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)
– (1x) RS-232 port.
– (1x) HALF/FULL Duplex RS-485 port.
– (1x) SPI external port (Using MOSI, MISO, SS pins of Arduino)
– TCP IP / Modbus TCP. / Modbus RTU
– WebServer capacity (just through Ethernet)
– Industrial Protocols
Other technical specifications
RTC (Real Time Clock. NOTE: I2C port used. See pinout modification)
µSD Socket (using SPI port, chip select D53 pin).
100x75x115mm
DIN Rail mounting.
Max consum.: 1.2A
Flash Memory: 256kB (8kB for bootloader)
SRAM: 8kB
EEPROM: 4kB
Clock Speed: 16MHz
*For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
