MDUINO PLC ARDUINO ETHERNET& WiFi & BLUETOOTH LE 42 I/Os ANALOG/DIGITAL PLUS
26 inputs
16 outputs
Communications
RTC, µSD, Ethernet, USB, Full/Half duplex, RS485, RS232, I2C, Modbus
Wi-Fi & Bluetooth LE (ESP32).
DESCRIPTIONS
Inputs (Arduino Mega included)
– 26 Input:
(12x) Analog (0-10Vdc) /Digital (7-24Vdc) configurable by software1
(14x) Digital Isolated (7-24Vdc).
Outputs (Arduino Mega included)
– 16 Output:
– 16 Output:
(16x) Digital Isolated (5-24Vdc) / (6 of which) PWM configurable by software1.
(6 of which) Analog (0-10Vdc) configurable by switch.
COMMUNICATIONS
- (1x) WiFi & Bluetooth LE (based on ESP32)
– (1x) Ethernet port.
– (1x) USB port (type B).
– (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)
– (1x) RS-232 port.
– (1x) HALF/FULL Duplex RS-485 port.
– (1x) SPI external port (Using MOSI, MISO, SS pins of Arduino)
– TCP IP / Modbus TCP. / Modbus RTU
– WebServer capacity (just through Ethernet)
– Industrial Protocols
Other technical specifications
- RTC (Real Time Clock. NOTE: I2C port used. See pinout modification)
- µSD Socket (using SPI port, chip select D53 pin).
- 100x75x115mm
- DIN Rail mounting.
- Max consum.: 1.2A
- Flash Memory: 256kB (8kB for bootloader)
- SRAM: 8kB
- EEPROM: 4kB
- Clock Speed: 16MHz
*For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
